The Sanyipace Aira Cearo SD03Pro is a smart toilet with a built-in bidet and several automated features. It is designed to handle washing, drying, and flushing in one setup.
Its main draw is how much of the bathroom routine it brings into one fixture, from personal washing to hands-free operation and built-in hygiene support.
This review looks at how those features work in everyday use, along with installation needs, flushing performance, and key specifications buyers should know before choosing the SD03Pro.
What Is the Sanyipace Aira Cearo SD03Pro?
The Sanyipace Aira Cearo SD03Pro is an all-in-one smart toilet that combines a standard toilet, bidet, dryer, and automatic controls in a single unit.
Unlike a separate bidet attachment, the washing system is built directly into the toilet. It also has an internal tank and two dedicated wash nozzles for different cleansing needs.
The Sanyipace Smart Toilet is designed to make daily bathroom use cleaner and more convenient. With automated cleansing, drying, and flushing, it reduces the number of steps you need to handle by hand.
What Makes the SD03Pro Stand Out?
The SD03Pro focuses on personalized washing, comfort, and sanitation rather than automation alone. Its main features let you tailor the experience while keeping everyday use simple.
1. Dual-Nozzle Bidet and Four Wash Modes
The Smart Bidet Toilet with a dual-nozzle setup gives you separate washing options for different needs. It also lets each user fine-tune the wash instead of relying on one fixed setting.
- Separate nozzles: Dedicated rear and feminine wash nozzles support different cleansing needs.
- Four wash modes: You can switch between four settings based on personal preference.
- Water pressure control: Spray strength can be adjusted for a gentler or stronger wash.
- Temperature control: You can also adjust water warmth for added comfort.
2. Endless Warm Water and Heated Seat
The comfort features extend beyond the wash itself. Warm water stays available during use, while the seat and dryer can be set to match your preference.
- Continuous warm water: The system supplies heated water throughout the wash cycle.
- Four seat heat levels: You can raise or lower the seat temperature as needed.
- Adjustable air dryer: You can change warm-air settings after washing.
- Reduced paper use: The dryer may help cut down on toilet paper after each use.
3. Hygiene and Self-Cleaning
The SD03Pro also includes features that support cleaner bidet operation between uses. These focus on the water path and nozzle, not adding more manual upkeep.
- Dedicated bidet water line: The wash system uses its own water path for personal cleansing.
- Dual filtration: Two-stage filtration helps keep the wash water cleaner.
- Self-cleaning nozzle: The nozzle rinses itself during regular operation.
- UV sterilization: UV treatment adds another sanitation step for the nozzle area.
Smart Features That Handle More for You
The SD03Pro can handle several small bathroom tasks automatically. Instead of reaching for the lid, flush button, or controls every time, the toilet can handle many common steps on its own.
Its microwave sensor can automatically open the lid and flush when it detects movement nearby. A foot-kick control gives you another hands-free option, which can be useful when you want to limit contact with shared surfaces.
The one-touch cycle is especially practical because it combines washing, drying, and flushing into one sequence. Automatic bowl pre-wetting can also help reduce waste from sticking to the surface before use.
For nighttime visits, the ambient light provides low-level visibility without turning on a bright bathroom light. The built-in deodorizer helps manage odors after use, adding another useful feature to the overall setup.
How Does the SD03Pro Perform During a Power Outage?
The SD03Pro is built to keep flushing practical during normal use and power outages. Its tank and backup system support both.
- Built-in tank: Stores water inside the unit instead of depending only on direct water pressure.
- 1.2 GPF flush: Uses 1.2 gallons per flush for regular operation.
- Assisted flushing: Pump-assisted performance helps move waste through the bowl with stronger flushing force.
- Battery backup: With batteries installed, the toilet can still support emergency flushing during a power outage.
- 100+ emergency flushes: According to the manufacturer, the backup can provide more than 100 flushes during an outage.
What You Need Before Installing the SD03Pro
Before buying the SD03Pro, make sure your bathroom meets its plumbing and power needs. A few early measurements can save trouble during installation.
1. Rough-In and Plumbing
The SD03Pro is designed for a standard bathroom layout, but the drain and valve positions must still line up correctly.
- 12-inch rough-in: Measure from the finished wall to the center of the toilet drain.
- Water connection: The manufacturer lists a 3/8″ × 1/2″ NPT angle valve.
- Plumbing fit: Make sure the drain and shutoff valve match the toilet’s required layout.
2. Electrical Requirements
The bidet, heated seat, dryer, and automatic functions all depend on a nearby power source.
- Power supply: AC 110V ±10%, 50/60Hz.
- Outlet access: The outlet should be close enough for the cord to reach without strain.
- Power cord: The included cord is 4.92 ft (1.5 m) long.
Safety tip: Do not alter household wiring unless you are qualified. If you need a new outlet or wiring changes, use a licensed electrician and follow local electrical codes.
3. Installation and Maintenance
Sanyipace provides installation instructions and video support for the SD03Pro. Professional help may still be useful if your bathroom setup needs changes.
- Follow the manual: Use the manufacturer’s steps to fit and connect the unit.
- Call a plumber when needed: Get help if the drain or water line needs adjustment.
- Clean gently: Wipe the exterior with a soft, damp cloth.
- Keep electronics dry: Do not spray or rinse the electronic unit directly with water.
SD03Pro Key Specifications At a Glance
For a quick comparison, these are the main SD03Pro specifications listed by the manufacturer. This table keeps the key sizing, wash, power, and flushing details in one place.
|
Specification |
SD03Pro |
|---|---|
|
Dimensions |
680 × 390 × 465 mm |
|
Rough-in |
12 inches |
|
Bidet |
Dual nozzles |
|
Wash modes |
4 |
|
Warm water |
Endless |
|
Heated seat |
4 levels |
|
Air dryer |
4 temperature levels |
|
Flush volume |
1.2 GPF |
|
Power |
AC 110V ±10% |
|
Backup |
100+ emergency flushes |
So, Does the SD03Pro Fit Into Your Home?
The SD03Pro brings several functions into one fixture, which can make it easier to add smart toilet features without installing separate bathroom equipment.
- Everyday comfort: A heated seat, warm-water wash, and warm-air dryer can make regular use feel more comfortable.
- Simpler routines: Hands-free controls and the automatic wash, dry, and flush cycle reduce the number of steps you need to handle.
- Better hygiene: Dual nozzles, self-cleaning, UV treatment, and water filtration support a cleaner washing system.
- A cleaner setup: The built-in bidet keeps washing functions within the toilet instead of requiring a separate bidet fixture.
- Practical peace of mind: Battery-backed flushing keeps the toilet’s basic flush function available during a power outage.
Conclusion
The Sanyipace Aira Cearo SD03Pro combines smart functions with practical bathroom features in a setup designed for everyday use.
The best fit will depend on your bathroom layout, electrical access, and which features you will actually use.
Before ordering, check your rough-in, outlet location, and plumbing connections carefully. If everything lines up, compare the specifications with your needs and decide if the SD03Pro belongs in your bathroom.
Frequently Asked Questions
Does the SD03Pro Have a Built-in Bidet?
Yes. It includes a built-in bidet with separate rear and feminine wash nozzles.
Does the SD03Pro Provide Continuous Warm Water?
Yes. Its instant heating system provides continuous warm water during washing.
Does the SD03Pro Work During a Power Outage?
The toilet includes battery backup for emergency flushing. The manufacturer says it can support more than 100 flushes during an outage.
What Rough-in Does the SD03Pro Require?
The SD03Pro requires a 12-inch rough-in, measured from the finished wall to the center of the toilet drain.
Can the SD03Pro Replace Some Toilet Paper Use?
Yes. The built-in bidet and warm-air dryer can reduce how much toilet paper you need after use.
